GB PAO pistol sight fitting demonstration

Transcript

00:05
right this video is to demonstrate the
00:08
PIO professional airgun optics won by 30
00:12
red and green dot air pistol side what
00:17
you get in the box
00:18
is a good stout cardboard box you get
00:22
the sight which I’ll open in a minute an
00:26
allen key a lens cloth and of course the
00:30
instructions which are well worth
00:32
reading before you do anything with it
00:35
now I’ll just get the sight out and it
00:40
comes supplied with two lens caps which
00:43
I’ll keep on for now and it has Allen
00:49
screw fixings it’s a weaver rail mount
00:53
which is 22 millimeters which is
00:55
suitable for a pistol such as this the
00:58
Webley Alecto okay the next thing to do
01:01
is Mount the sight onto the top rail of
01:04
the pistol so the screws are slackened
01:07
off and you place it on like so and
01:11
tighten up the allen screws it’s worth
01:17
noting that this gun doesn’t have a
01:21
recoil slot or recoil slots on the top
01:24
rail but also the fact that this mount
01:27
does not have a recoil stop on it as
01:32
well so it’s suitable for mounting on
01:35
this type of weaver rail just tighten
01:38
those up a bit more make sure it’s armed
01:41
remove the dust caps and that is it
01:45
ready to go now the site is fitted on
01:48
the top of the gun you can see that it
01:50
has windage elevation these are dust
01:54
caps these come off and you get at the
01:58
clickers and the top turret here is five
02:03
levels of red and green illumination so
02:07
I’ll just switch it on to the highest
02:11
now the gun is loaded so I shall point
02:15
downrange not safety off and shoot a
02:20
beer account and that’s it
02:32
you

Leave a Comment